Multiplayer Gaming on Windows 98 with DOSBox Pure

From Retro Media HUB
Revision as of 01:15, 19 November 2025 by Admin (talk | contribs)

Introduction

Windows 98 was a classic platform for multiplayer gaming, especially over LAN. With DOSBox Pure, you can recreate that environment today by running Windows 98 inside an emulator and enabling networking support.

Requirements

Setup

One way to transfer the driver files into Windows 98 is to create a batch file (empty file runme.bat) in the same folder as the drivers. When you load this batch file with DOSBox Pure and enter the operating system, the required files for installing the network will be available on the D drive.

In Windows 98, open the Control Panel and click Add New Hardware.

Win98-network-setup1.png

When the wizard window appears, choose to install the hardware manually from a list.

Win98-network-setup2.png

Select Network adapters then Next.

Win98-network-setup3.png

Click Have Disk to choose the folder where NE2000 drivers are located.

Win98-network-setup4.png

Inside the folder Lnt-10tn you need to select Win98 folder.

Win98-network-setup5.png

After selecting the Win98 folder a new file show up on the left.

Win98-network-setup6.png

Click OK to proceed with the installation

The adapter is found from the selected pcmcard.inf file

Be prepared to mount the Windows 98 CD, it will be required during installation. Also during the installation version conflict files will be detected, just click Yes, to keep the system files, to all of them.

Once completed, you need to restart the operating system!


A new icon should appear on the desktop, indicating the network has been installed successfully.

The new icon will show after the restart of the OS


Go in Control Panel then Network.

Win98-network-setup8.png

Click Add then select Adapter from the list and click the Add button.

We need to add the NE2000 adapter

Select Adapter then Add.

Win98-network-setup11.png

From the left list choose Novell/Anthem and on the right list choose NE2000 Compatible.

Win98-network-setup12.png

Now select the new adapter and click Properties.

Win98-network-setup9.png

Go in the Resources tab and change its properties to use:

  • IRQ = 10
  • Port = 0x300
Win98-network-setup13.png

Click OK and you are done, you can restart the OS and you are ready to play with another RetroArch on another machine.

How to play

Host PC

Before loading the game, go in Netplay then Host, then just load the game.

Client PC

Before loading the game, go in Netplay then Network and change the Server Address to the IP of the host computer.

From the Netplay menu click Connect to Netplay Host, then load the game normally.

The host should receive notifications of clients connecting to its network once the client start the game.

From the game you need to figure out how to play with other PC, this guide cannot cover this steps, if you need help you can try joining the Discord channel.

Notes

The operating system will detect a NE2000 networking card which will not be able to connect to the real internet. To avoid slow boot times, make sure to configure it to use base address port set to 0x300 and base IRQ set to 10.

Reference link to the DOSBox Pure GitHub page.

Retrieved from "https://retromediahub.com/index.php?title=Multiplayer_Gaming_on_Windows_98_with_DOSBox_Pure&oldid=341"